What Is Pump Jack Scaffolding?

What are the 3 types of scaffolds?

Workers who use scaffolds can be divided into three groups:Suspended Scaffolds.Supported Scaffolds.Aerial Lifts..

How high can Scaffolding go?

Scaffold tower can be erected in all shapes and sizes. The standard dimensions are 5 foot and 7 foot long. Reaching 5 foot high all the way up to 30 feet tall.

What is ladder scaffolding?

A ladder jack scaffold is a system designed to perform activities, such as: installing building exteriors, trim, and finishes. … Triangle-shaped brackets called “ladder jacks” are attached to portable ladders, which are used on each side of a ladder jack scaffold to form a means of support for a platform.

What are pump jacks used for?

A pump jack is a device used in the petroleum industry to extract crude oil from a oil well where there is not high enough pressure in the well to force the oil to the surface. These pump jacks physically extract the oil for use. Pump jacks and oil derricks are commonly confused, but are not the same.

How do you raise scaffolding?

StepsSelect a secure foundation on which to build and set your scaffold. … Opt for casters. … Assemble the scaffolding frame. … Make sure the scaffold is stable. … Place the planks. … Secure access to the scaffold. … Attach the guardrails. … Inspect the scaffolding to ensure safety.More items…

Can you use ladders on scaffolding?

Scaffolding Safety Don’ts This includes any building materials or tools that you may have been using on the scaffold while you were working. … In most instances, scaffolds should be capable of supporting at least four times its maximum intended load. Don’t use boxes or ladders to increase your work height.

What is the advantage of a pump jack scaffold?

Workers use a pump on the actual jacks to raise or lower the platform as needed. This type of scaffolding is very easy to transport and install. It also provides a dynamic work environment that can be moved up or down at any point. The system is even stable on uneven ground unlike steel self-supporting units.

How much scaffolding do I need?

Divide the total height measurement by the height of a single scaffolding section. This will determine the total number of rows of scaffolding the project will require. Multiply the number of rows by the number of columns to find the total number of scaffold sections necessary for the project.

How do you make a ladder scaffold?

How to Make a Step Ladder ScaffoldGet two ladders that are of the same style and height. … Open the ladders. … Secure a platform between the two. … Place the scaffolding on the same step of each ladder by sliding it through the ladder frame and allowing it to sit when there is a minimum of 6 inches of board extending out the front of each ladder.

How high can pump jacks go?

48 feetPump jacks are scaffolds consisting of poles, a foot pump, and scaffold planks. Ideal for construction, painting, and roofing. Maximum height: 48 feet (with 2 24′ poles, brace, and joint).

Can I erect my own scaffolding?

Who can put up scaffolding? You must use a builder or scaffolding contractor who is trained and competent to put up scaffolding. This means they need to have the necessary skills, experience and knowledge to manage health and safety.